plate voltage मीनिंग इन हिंदी

उदाहरण वाक्य

1. After 1976, the plate voltages were lowered slightly for improved reliability.
2. I doubt that it used a very high plate voltage.
3. Areas with 220 240 volt AC supplies could develop higher plate voltage with a simple rectifier.
4. Like most A . F . amplifiers in radios, the plate voltage is usually less than 60 volts.
5. Some tube will provide some amplification down to 22 volts of plate voltage, though the amplification may be low.
6. A tube with an unusually high level of internal gas may exhibit a visible blue glow when plate voltage is applied.
7. When a tetrode or pentode is used, the screen grid voltage is usually about one-half the plate voltage.
8. The "'866 "'is a filament preheated for at least 30 seconds before applying the plate voltage.
9. This is grounded at the operating frequency, but carries a DC potential, normally 10 to 50 % of the plate voltage.
10. Tube caps were also used for the plate ( anode ) connection, particularly in transmitting tubes and tubes using a very high plate voltage.